HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software Command Line Interface Reference Guide (EK-G80CL-RA. C01, March 2005)

CLI Command Descriptions
54 HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software
Command Line Interface Reference Guide
Creates a specialized volume, called a concatset or concatenation set, from a
storageset that was given a unit number. Another storageset can then be added to
the concatset by using the SET concatset-name command, and thereby,
dynamically increasing the size of the unit.
Caution: This command can only be executed with host operating systems
that support dynamic volume expansion. If the operating system cannot
handle one of its disks increasing in size, use of this command could make
data inaccessible.
Syntax
ADD CONCATSETS concatset-name storageset-name
Parameters
The following parameters are required for the ADD CONCATSETS command:
■ concatset-name
■ storageset-name
These parameters are described in the following paragraphs.
concatset-name
Identifies the name to be assigned to the concatenation set or concatset. The
concatset-name must consist of a string of up to nine printable characters
excluding commas and backslashes.
storageset-name
Designates the first storageset to be a member of the concatset. The storageset
specified must already be configured as a unit.
Switches
There are no switches associated with this command.
ADD CONCATSETS