HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software Command Line Interface Reference Guide (EK-G80CL-RA. C01, March 2005)

CLI Command Descriptions
59HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software
Command Line Interface Reference Guide
Caution: Turning the port off and then on is better than rebooting the system,
since pinging the fabric name server would result in all hosts re-logging in (up
to 96).
After the connection is added, it gets deleted from the reject list. Index
numbers for remaining rejected hosts are re-ordered.
Switches
The following switches support the ADD CONNECTION command:
■ OPERATING_SYSTEM
■ RESERVATION_STYLE
■ UNIT_OFFSET
These switches are described in the following paragraphs.
OPERATING_SYSTEM=OS_name
Specifies the operating system of the host. The OS_name switch is used to
tailor controller behavior for use with a particular operating system. Refer to
your operating system specific operating system (OS) solution software kit to
determine which value should be used. The following values are supported:
■ HP
■ IBM
■ NETWARE
■ SGI
■ SNI
■ SUN
■ TRU64_UNIX
■ VMS
■ WINNT
■ AIX_CAMBEX
■ HP_VSA