HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software Command Line Interface Reference Guide (EK-G80CL-RA. C01, March 2005)

CLI Command Descriptions

77HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software

Command Line Interface Reference Guide

Note: If you move a RAIDset from one controller to another, and the RAIDset becomes

reduced during the move, you cannot use the

REDUCED switch to recreate the

RAIDset. To recreate the RAIDset, you must:

1. Create a new RAIDset with the remaining original members.

2. Add a new disk (that is newly initialized) to complete the number of members

in the original set

without

using the REDUCED switch.

3. Observe that the system recognizes the newly added disk as not part of the

original RAIDset and moves it to the failedset.

4. Move the new disk from the failedset, and place it into the active RAIDset.

Refer to the

HP StorageWorks HSG60 and HSG80 Array Controller and Array

Controller Software Maintenance and Service Guide

for additional details.