HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software Command Line Interface Reference Guide (EK-G80CL-RA. C01, March 2005)

CLI Command Descriptions

98 HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software

Command Line Interface Reference Guide

Stops the display of current or previous error messages at the CLI prompt. Errors

are displayed (even after the error condition is rectified) until the controller is

restarted or this command is entered.

Note: This command does not clear the error condition. The command only stops the

CLI from displaying the error.

There are three message types:

■ General information

■ Warning (you may want to examine, but the command is executed)

■ Error (command does not execute)

Syntax

CLEAR_ERRORS CLI

Parameters

There are no parameters associated with this command.

Switches

There are no switches associated with this command.

Example

To clear any message enter:

CLEAR_ERRORS CLI