HP StorageWorks HSG80 ACS Solution Software V8.8 for Tru64 UNIX Installation and Configuration Guide (AA-RV1VA-TE, March 2005)

Installing and Configuring the HSG Agent
141HSG80 ACS Solution Software V8.8 for Tru64 UNIX Installation and Configuration Guide
23. Press Enter.
The software asks if the displayed information is correct.
24. If the displayed information is correct, select option y and press the Enter
key.
A message, asking if you would like to add another person to notify, appears.
25. Select option n to end the dialog or y to add another person to notify. Press
Enter.
After you select option n, the system will start the new Agent. If the
installation script detects a problem at Agent startup, it will alert you.
You are asked if you are running Agent in a TruCluster environment.
Note: SWCC in A TruCluster environment (Appendix C) goes into detail on how to
setup the SWCC Agent in a TruCluster Environment.
Final System Configuration
26. Do one of the following:
— If you are running the Agent in cluster, select option y. The software is
configured to scan the SCSI-bus for subsystems at startup.
— If you are not running the Agent in a cluster, select option n. The software
is configured to look at the storage.ini file at startup time. The storage.ini
file contains the listing of your subsystems.
Table 18: Definitions of Email Notification Options
Term Definition
Critical
Errors
Notifies you of errors that would prevent you from accessing data; for
example, a disk failing or a client system not available on the network.
Warnings Notifies you when something is broken, but its breakage does not
prevent you from accessing data; for example, the RAID degrading or
losing a fan.
Information Provides messages, but they do not indicate that something is broken.
Examples of informational messages are the following: an Agent
startup message or a message saying that an error has been resolved.