HP StorageWorks HSG80 ACS Solution Software V8.8 for Tru64 UNIX Installation and Configuration Guide (AA-RV1VA-TE, March 2005)

Installing and Configuring the HSG Agent
143HSG80 ACS Solution Software V8.8 for Tru64 UNIX Installation and Configuration Guide
Reconfiguring the Agent
You can change your configuration using the SWCC Agent Configuration menu.
To access this menu, enter the following command:
# /usr/opt/SWCC520/scripts/swcc_config
The following is an example of the menu:.
Caution: After you make a change to the configuration, such as adding a
client system, you must stop and then start the Agent for your changes take
effect. When you stop and then start the Agent, the Storage Windows for the
subsystems connected to the agent system lose their connection. To regain that
connection, close and then reopen the Storage Windows connected to the
agent system after you restart the Agent.
SWCC Agent Configuration Utility
-----------------------------------
-----
Options Available Are:
1) Add/Delete Client PC
Information.
2) Modify Storage Subsystem
Information.
3) Add/Delete Storage Subsystem
Information
4) Change SWCC Agent Password.
5) Turn Email Notification ON/OFF.
6) Add/Delete Email Notification
Users.
7) Restart Agent With Changes.
8) Enable/Disable Agent.
9) Scan/Don’t Scan on Startup
10) Cluster/No Cluster
Enter a number or 'q' to QUIT: