HP StorageWorks HSG80 ACS Solution Software V8.8 for Tru64 UNIX Installation and Configuration Guide (AA-RV1VA-TE, March 2005)

Installing and Configuring the HSG Agent
145HSG80 ACS Solution Software V8.8 for Tru64 UNIX Installation and Configuration Guide
Removing the Agent
Caution: Do not uninstall the Agent if you want to preserve configuration
information. If you only want to install an upgrade, stop the Agent, and then
install the new version. Older versions will be automatically removed before
the update, but all configuration information will be preserved.
1. Enter the following and press the Enter key:
# setld -d SWCC520
The procedure to remove the Agent asks the following:
Are you sure you want to delete all Agent data?
2. Do one of the following:
— Select option y and then press the Enter key. All configuration files for
the Agent is deleted.
Deleting a client system entry When you remove a client system from the Agent’s
list, you are instructing the Agent to stop sending
updates to that client system. In addition, you will be
unable to access this agent system from the
Navigation Tree.
Email notification Modify file pagemail.com in directory
sys$sysdevice:[swcc$agent].
When an error is logged, the Agent executes the
PAGEMAIL.COM command. You can modify this file
for Agent to log errors in a log file and/or change
the account to which Agent sends messages. You
can also modify for which level of errors you will be
notified. Client does not need to be running to
perform these actions.
Monitoring interval in
seconds
How often the subsystem is monitored.
Password It must be a text string that has 4 to 16 characters. It
can be entered from the client system to gain
configuration access. Accessing the SWCC Agent
Configuration menu can change it.
Table 19: Information Needed to Configure Agent (Continued)
Term/Procedure Description