HP StorageWorks HSG80 ACS Solution Software V8.8 for Tru64 UNIX Installation and Configuration Guide (AA-RV1VA-TE, March 2005)

SWCC Agent in TruCluster Environment
226 HSG80 ACS Solution Software V8.8 for Tru64 UNIX Installation and Configuration Guide
SWCC Overview
The SWCC is a graphical user interface (GUI) for managing StorageWorks
Redundant Array of Independent Disks (RAID) array products from a client
(console) running on Microsoft Windows NT 4.0 with Service pack 4 or later, or
Windows 2000. With SWCC you can configure virtual disks, receive notification
of events, and monitor your storage systems.
The SWCC consists of a client and an agent. The client GUI runs on Windows NT
4.0 or Windows 2000 and provides an easy method of configuring, operating,
monitoring, and troubleshooting your storage subsystem.
The agent is a companion program that is installed on one of the supported
operating systems, in this case, Tru64 UNIX, to which a controller is connected.
The agent lets the client communicate with the storage system over a TCP/IP
network.