HP StorageWorks HSG80 ACS Solution Software V8.8 for Tru64 UNIX Installation and Configuration Guide (AA-RV1VA-TE, March 2005)

SWCC Agent in TruCluster Environment
237HSG80 ACS Solution Software V8.8 for Tru64 UNIX Installation and Configuration Guide
Running the SWCC Agent on a V5.x Cluster
This section is intended for users of Tru64 UNIX V5.x. Running SWCC on a
V5.x Cluster has the following requirements:
The SWCC Tru64 UNIX agent installation script is not cluster-aware. It adds
swcc and S500swcc entries to the /sbin/init.d and /sbin/rc3.d directories,
respectively, and starts the steamd daemon on the system.
In addition, the SWCC configuration script
(/usr/opt/SWCCx/scripts/swcc_config) and initialization file
(/usr/opt/SWCCx/etc/storage.ini) are not context-dependent
symbolic links (CDSLs) and are shared by all cluster members. Therefore,
Table 20: Configuration Requirements
Requirement Description
Operating System Tru64 UNIX Version 5.0 or higher and TruCluster Server
Version 5.0A or higher.
Supported Controllers and
Minimum Firmware
Versions
The supported firmware has locking features that prevent
data corruption resulting from access by multiple systems.
The supported combinations of controllers and minimum
firmware versions are as follows.
HSZ40 3.7; HSZ50 5.7; HSZ70 7.7
HSZ80 8.3-1; HSG80 8.5; HSG60 8.5L
Earlier versions of the firmware are explicitly not
supported.
HSZ40 3.7
HSZ50 5.7
HSZ70 7.7
HSZ80 8.3-1
HSG80 8.5
HSG60 8.5L
Earlier versions of the firmware are explicitly not
supported.
Disk Space Required for
Agent
2 MB free space in /tmp directory. 4 MB free space for
the Agent installation directory.
Skill Level Requirements This procedure is intended for experienced system
administrators or programmers. Familiarity with shell
programming and access to the root of the TruCluster
Server Cluster is required.