HP StorageWorks HSG80 ACS Solution Software V8.8 for Tru64 UNIX Installation and Configuration Guide (AA-RV1VA-TE, March 2005)

SWCC Agent in TruCluster Environment
249HSG80 ACS Solution Software V8.8 for Tru64 UNIX Installation and Configuration Guide
Checking file system space required to install selected subsets:
File system space checked OK.
1 subsets will be installed.
Loading subset 1 of 1 ...
SWCC Agent 2.3 For Tru64 Unix
Copying from . (disk)
Verifying
1 of 1 subsets installed successfully.
Setting up daemon for V5.x.
NOTE: 'catman' is currently running, so I can't update your
'whatis' database. After this installation run 'catman -w' if
you want to update 'whatis'.
------------------ CLIENT.INI ------------------
The 'client.ini' file stores information about PC's running the
SWCC Graphical User Interface (GUI). To allow client systems
running the GUI access to your StorageWorks RAID subsystem you
will need to enter the following information for each client.
* Clients hostname.
* Clients access privilege.
* Clients notification level.
For more information see man page steamd.8.
Press 'Return' to Continue
Adding a Client system
----------------------
Enter the host name of the Client system : adminpc.zk3.dec.com
Enter the subsystem access privilege (which controls the level
of access
a client has for communicating with the storage subsystems).
The possible options are:
0 = Overall Status
1 = Detailed Status
2 = Configuration + Status
Enter Access Level (0, 1, 2) : 2