HP StorageWorks HSG80 ACS Solution Software V8.8 for Tru64 UNIX Installation and Configuration Guide (AA-RV1VA-TE, March 2005)

SWCC Agent in TruCluster Environment
251HSG80 ACS Solution Software V8.8 for Tru64 UNIX Installation and Configuration Guide
------------------ STORAGE.INI ------------------
The 'storage.ini' file stores information about RAID devices
connected to your server. The SWCC agent reads this file at
startup. If this installation supersedes an older version and
the storage.ini file is found; you will be given the option to
use it. If not; the following information will be needed for
each RAID subsystem you want the agent to interact with.
* RAID subsystem name.
* Monitoring Interval in seconds.
For more information see man page steamd.8.
Press 'Return' to Continue
Scanning your system. This may take awhile depending on the size
of your system. Please Stand-By.
* * *
Adding a Storage Subsystem
---------------------------
Enter a name for the FIRST HSG80 I found on this system:
delihsg80
The Agent monitors RAID systems at regular intervals. You
specify this polling interval in seconds ( 0 = No monitor; 300 =
every 5 minutes. )
Enter Monitoring Interval for delihsg80: 300
Review Storage Subsystem Information--
name: delihsg80
Monitor Interval: 300
Is this information correct? [y,n] y