HP StorageWorks HSG80 ACS Solution Software V8.8 for HP-UX Installation and Configuration Guide (AA-RV1FA-TE, March 2005)

Using CLI for Configuration
190 HSG80 ACS Solution Software V8.8 for HP-UX Installation and Configuration Guide
Mark or tag both ends of Fibre Channel cables.
Repeat this process to add connections from the other two hosts. The resulting
connection table should be displayed similar to the following:
Connection
Name
Operating
System
Controller Port Address Status
Unit
Offset
RED1A1 HP OTHER 1 XXXX
XX
OL
other
0
HOST_ID=XXXX-XXXX-XXXX-X
XXX
ADAPTER_ID=XXXX-XXXX-XXX
X-XXXX
RED1B1 HP THIS 1 XXXX
XX
OL this 0
HOST_ID=XXXX-XXXX-XXXX-X
XXX
ADAPTER_ID=XXXX-XXXX-XXX
X-XXXX
RED2A2 HP OTHER 2 XXXX
XX
OL
other
0
HOST_ID=XXXX-XXXX-XXXX-X
XXX
ADAPTER_ID=XXXX-XXXX-XXX
X-XXXX
RED2B2 HP THIS 2 XXXX
XX
OL this 0
HOST_ID=XXXX-XXXX-XXXX-X
XXX
ADAPTER_ID=XXXX-XXXX-XXX
X-XXXX