HP StorageWorks HSG80 ACS Solution Software V8.8 for Sun Solaris Installation and Configuration Guide (AA-RV1RA-TE, March 2005)

Preparing the Host System
108 HSG80 ACS Solution Software V8.8 for Sun Solaris Installation and Configuration Guide
Installing Solution Software Packages
Several significant installation changes have been made in Solution Software
V8.8 for Sun Solaris. The most significant changes are a friendlier and more
logical installation process and moving /opt/steam/bin/config.sh Option 20 to
/opt/HPfcraid/bin/config.sh. Following are the significant logistical
items that result from this change:
■ When you uncompress and un-tar the bundle, the top level of the directory
contains the install_stgwks script. This script is run on first-time
installations as well as upgrades on all valid versions of HBA drivers and
HSG80 Solution Software. Answer “yes” to all queries to remove and replace
all currently installed drivers.
■ The install option “Select mode automatic or manual [A,m] :” has been
removed. The option has been replaced with appropriate queries to install
available drivers but does not allow the option to not install related dependent
packages.
■ The /opt/HPfcraid directory is now used for all new installed adapter
configuration options (Option 20).
Note: This does not replace an installed /opt/CPQhsv or /opt/CPQfcraid
directory.
■ The config.sh Option 20 script has been moved to the
/opt/HPfcraid/bin directory. This script can be used for
configuring installed HBAs and adding new arrays, HBAs & HBA ports after
the initial install configuration.
■ To remove the Platform Kit and Secure Path packages, search for all installed
packages using: pkginfo | egrep “CPQ|QLA|fca|HP” and pkgrm
all found packages.
Installing RAID Manager Software
To install the RAID Manager software on a new installation:
1. Download the HSG80 Solution Software update software from the web site
http://h18006.www1.hp.com/products/storageworks/ma8kema12k/kits.html .
2. Move the compressed tar file to a temporary directory and uncompress and
un-tar the packages.