HP StorageWorks HSG80 ACS Solution Software V8.8 for Sun Solaris Installation and Configuration Guide (AA-RV1RA-TE, March 2005)

Installing and Configuring the HSG Agent
120 HSG80 ACS Solution Software V8.8 for Sun Solaris Installation and Configuration Guide
About the Network Connection for the Agent
The network connection, shown in Figure 35, displays the subsystem connected to
a hub or a switch. SWCC can consist of any number of Clients and Agents in a
network. However, it is suggested that you install only one Agent on a computer.
By using a network connection, you can configure and monitor the subsystem
from anywhere on the LAN. If you have a WAN or a connection to the Internet,
monitor the subsystem with TCP/IP.
Note: SWCC does not support the dynamic host configuration protocol (DHCP) or the
Windows Internet Name Service (WINS).