HP StorageWorks HSG80 ACS Solution Software V8.8 for Sun Solaris Installation and Configuration Guide (AA-RV1RA-TE, March 2005)

Installing and Configuring the HSG Agent
124 HSG80 ACS Solution Software V8.8 for Sun Solaris Installation and Configuration Guide
Configuring the Agent with Install.sh (for First-time Configurations)
For first-time configurations, run the install.sh script from the
$basedir/steam/bin directory (usually
/opt/steam/bin). This script will guide
you through the following actions:
■ Adding a subsystem entry
■ Adding a Client entry
■ Creating a password
■ Setting up email notification
■ Starting the Agent
1. To change directories, enter the following command:
# cd /opt/steam/bin
2. To run the installation, enter the following command:
# ./install.sh
Follow the on-screen prompts to set up your Agent files. If install.sh
finds backed up Agent configuration files, you will be asked if you want to
upgrade them.
Configuring the Agent with RAID Array V8.8 Configuration Menu
To view the RAID Array V8.8 Configuration Menu, run the Config.sh script
from the $basedir/steam/bin directory (usually /opt/steam/bin).
1. Enter the following command:
# cd /opt/steam/bin
2. Enter the following command:
#./config.sh
The Configuration Menu shown in Figure 36 appears.