HP StorageWorks HSG80 ACS Solution Software V8.8 for Sun Solaris Installation and Configuration Guide (AA-RV1RA-TE, March 2005)

FC Configuration Procedures
166 HSG80 ACS Solution Software V8.8 for Sun Solaris Installation and Configuration Guide
The menu is shown below. All the options in this menu apply to any subsystem
and any server, regardless of the Fibre Channel access chosen.
Adding/Changing Adapters
The option Add/Change Adapters, which used to appear in the
/opt/steam/bin/config.sh
script, has been moved to
/opt/HPfcraid/bin/config.sh. When the V8.8 kits are being installed,
the user has the opportunity to define the specific type of Fibre Channel
configuration for each adapter, either loop or fabric (QLogic HBAs are supported
in fabric-mode only).
---- RAID Array V8.8 Configuration Menu ----
Agent Admin Options
---------------------
1) Change Agent Password
2) Change SNMP Enterprise OID
3) Start/Stop the Agent
4) Toggle Agent Startup on System
Boot
5) Uninstall Agent
Agent Notification Options
---------------------------
6) Toggle Error Log Notification
7) Toggle Mail Notification
8) View Mail Notification List
9) Add User to Mail Notification List
10) Remove User from Mail
Notification List
11) Modify Mail Notification List
Exit:
-----
q) Quit
Enter Selection:
Storage Subsystem Options
-----------------------------
12) View Subsystems
13) Add a Subsystem
14) Remove a Subsystem
15) Modify a Subsystem
Client Options
---------------
16) View Clients
17) Add a Client
18) Remove a Client
19) Modify a Client
20) High Avail. Options