HP StorageWorks HSG80 ACS Solution Software V8.8 for Sun Solaris Installation and Configuration Guide (AA-RV1RA-TE, March 2005)

FC Configuration Procedures
167HSG80 ACS Solution Software V8.8 for Sun Solaris Installation and Configuration Guide
Note: Changing values or the driver mode for one adapter instance will not affect the
mode for the other adapter instances. In this way, unique instances of each adapter
can exist for a specific type of a fibre transport medium, loop or fabric.
.
To make a change to the adapters, select Option 20, Add/Change Adapters.
When selected, you access the following sub-menu:
Note: Option 20 has been moved to /opt/HPfcraid/bin/config.sh.
Note: In the header of this sub-menu, remember that actions that are performed here
will affect the specific instance mappings in the /kernel/drv/sd.conf file as well
as the specific driver configuration file, fca.conf, fcaw.conf, fca-pci.conf,
qla2200.conf, or qla2300.conf.
--- Adapter Configuration Menu
---
(sd.conf & fc*.conf)
1) View Adapters
2) Add an Adapter
3) Remove an Adapter
4) Modify an Adapter
5) View available WWPNs
q) Exit
Enter choice: