HP StorageWorks HSG80 ACS Solution Software V8.8 for Windows NT, Windows 2000, and Windows Server 2003 (32-bit) Installation and Configuration Guide (AA-RV1XA-TE, March 2005)

Preparing the Host System
115HSG80 ACS Solution Software V8.8 for Windows NT, Windows 2000, and Windows Server
2003 (32-bit) Installation and Configuration Guide
4. Select StorageWorks CC HSG80 ACS V8.5 or newer.
5. When the Connection Selection dialog box displays, click
Serial, then click
OK to display the Connect Serial dialog box.
6. On the Connect Serial dialog box perform the following actions:
a. From the drop-down menu, select the PC COM port your HSG80
controller is connected to.
b. Select the baud rate (controller default is 9600).
c. Click
Connect to display the Storage Window.
You are now connected to your storage subsystem. The next step is to configure
the controller.
Note: The top window pane displays the virtual disks you create. The bottom window
pane shows the devices you have installed in the Enterprise Storage RAID Array Fibre
Channel Subsystem. At startup, Command Console finds installed drives and displays
them in a grid by channel and SCSI ID number.
Controller Properties
Note: This section discusses one method for setting controller properties. Controller
properties can also be set using the CLI.
The controller's operating parameters are stored in property sheets. Controller
property sheets are accessed by double-clicking on a controller icon in the Storage
Window or right clicking on the icon and selecting Properties. Property sheets are
tabbed. To access a sheet, click its tab.
Changes in all fields causes a controller restart to place the changes in effect. The
program prompts you for confirmation before it restarts your controller.