HP StorageWorks HSG80 ACS Solution Software V8.8 for Windows NT, Windows 2000, and Windows Server 2003 (32-bit) Installation and Configuration Guide (AA-RV1XA-TE, March 2005)

Preparing the Host System
118 HSG80 ACS Solution Software V8.8 for Windows NT, Windows 2000, and Windows Server
2003 (32-bit) Installation and Configuration Guide
Start the Wizard
To start the Command Console Virtual Disk Wizard perform the following
actions:
1. Establish a serial connection to your Enterprise Storage RAID Array Fibre
Channel Subsystem.
2. Access the subsystem's Storage Window.
3. Select Add Virtual Disk from the Storage menu.
Create the Virtual Disk
1. Click the radio button of the RAID level you want, then click Next.
2. Select the devices you want to include in the virtual disk from a list of
available storage devices. You select devices by clicking on them in the
Available Storage window in the dialog box. As you click them, they are listed
in the Selected devices: windowpane.
3. Select the capacity for the virtual disk, then click Next.
4. The wizard offers you the option of using only a portion of the capacity of the
devices you have selected for your new virtual disk. It displays the total,
available capacity of the devices you have selected in the capacity box. Enter
the size of the virtual disk to create in the box, then click Next.
5. To create multiple partitions, complete all steps for this partition. Then, access
the wizard again, and enter the same choices to create another partitioned
disk. When finished, click Next.
6. Enter the virtual disk name. Windows NT/Windows 2000/Windows Server
2003 (32-bit) recognizes the following disk names:
— D0 to D7 on Host Port 1 and D100 to D107 on Host Port 2 in SCSI-2
— D1-D7, D101-D107 in SCSI-3 where D0 is the CCL LUN.
7. Enter the maximum cache transfer blocks, then click Next. Host Access
controls which servers are allowed to access your storage system's virtual
disk.
8. The final Virtual Disk Wizard window, Step 5, recaps the choices you have
made in Steps 1 through 4. If you are satisfied with your choices, click Finish.
9. The storage set will start initialization. You can view the virtual disks you
have created by returning to the Storage Window.