HP StorageWorks HSG80 ACS Solution Software V8.8 for Windows NT, Windows 2000, and Windows Server 2003 (32-bit) Installation and Configuration Guide (AA-RV1XA-TE, March 2005)

Preparing the Host System
132 HSG80 ACS Solution Software V8.8 for Windows NT, Windows 2000, and Windows Server
2003 (32-bit) Installation and Configuration Guide
Note: Keep Cluster Service running on all nodes. Stopping the Cluster Service during
this procedure could result in a Cluster Service failure, and force a subsequent
reinstallation.
2. Stop Steam Agent (SWCC) in Services.
3. Using the Add/Remove Program in Control Panel, uninstall:
a. StorageWorks Command Console (SWCC).
b. Large LUN Utility (if installed)
Note: Do not Restart the system at this time.
4. Using your Solution Software CD-ROM, click the Solution Software v8.8
for Windows NT/2000/Server 2003 link.
a. Click the Perform Multi Driver Install/Update link to install the HBA
driver.
b. Click the Run Fibre Channel Utility link, then choose one of the
Transparent Fibre Channel setups, based on your configuration.
c. Click the SWCC link (optional) to install SWCC components.
5. Restart the updated cluster node.
6. Repeat Steps 1 through 5 for the next cluster node.
7. Once all cluster nodes have been upgraded, using Cluster Administrator,
restore all Cluster Groups to their original Prevent Failback setting, and
restore storage groups to their original configuration.
Solution Software Silent Installation
The Solution Software Solution for Windows has a “Silent Installation” option.
This “Silent Installation” is a method of creating an installation process best suited
to the functional needs of a system and, through that process, creates a default
script that can be utilized on other systems that need the same installation. This
same installation has the output of that first install but without all the steps to get
to that solution.