HP StorageWorks HSG80 ACS Solution Software V8.8 for Windows NT, Windows 2000, and Windows Server 2003 (32-bit) Installation and Configuration Guide (AA-RV1XA-TE, March 2005)

Installing and Configuring the HSG Agent
140 HSG80 ACS Solution Software V8.8 for Windows NT, Windows 2000, and Windows Server
2003 (32-bit) Installation and Configuration Guide
About the Network Connection for the Agent
The network connection, shown in Figure 37, displays the subsystem connected to
a hub or a switch. SWCC can consist of any number of Clients and Agents in a
network. However, it is suggested that you install only one Agent on a computer.
By using a network connection, you can configure and monitor the subsystem
from anywhere on the LAN. If you have a WAN or a connection to the Internet,
monitor the subsystem with TCP/IP.
Note: SWCC does not support the dynamic host configuration protocol (DHCP) or the
Windows Internet Name Service (WINS).