HP StorageWorks HSG80 ACS Solution Software V8.8 for Windows NT, Windows 2000, and Windows Server 2003 (32-bit) Installation and Configuration Guide (AA-RV1XA-TE, March 2005)
Installing and Configuring the HSG Agent
146 HSG80 ACS Solution Software V8.8 for Windows NT, Windows 2000, and Windows Server
2003 (32-bit) Installation and Configuration Guide
14. Click OK. The computer asks the following:
Would you like to start the Windows NT Agent service now?
15. Click Yes . The Agent starts.
16. Add this system to the Navigation Tree of each client system that you added
to the Agent's list (File > Add System in the Command Console Client). Refer
to the Command Console Client Help.
You can change the configuration you created when you installed the Agent by
using the HS Series Agent Configurator, which can be accessed from the Start
menu.
Changing the Agent Access Password
The password controls access to the Agent configuration.
1. Open the HS Series Agent Configurator.
2. Click Continue. The NT Agent Configuration Step 1 of 3 window appears.
3. Enter your new password in the New field, and retype it in the Verification
field. The password must have 4 to 16 characters.
4. Click Next to continue. The following message appears:
Password Validation Successful.
5. Click OK to continue. The NT Agent Configuration Step 2 of 3 window
appears.
6. Click Next to continue. If the NT Agent Configuration Step 3 of 3 window
appears, go to step 7.
The following message appears if you had previously added a subsystem:
A previous storage list is detected. Would you like to scan the
subsystem to update the information? (Subsystem names will
revert to default settings.)
If you click Yes, the software will automatically add entries for the new
subsystems and restore default subsystem information for the existing entries.
Or
If you click No, the software will keep the current settings.
The NT Agent Configuration Step 3 of 3 window appears.
7. Click Finish. The following message appears:
No subsystem information was added to the subsystem list.
Subsystem list will not be created or modified.