HP StorageWorks HSG80 ACS Solution Software V8.8 for Windows NT, Windows 2000, and Windows Server 2003 (32-bit) Installation and Configuration Guide (AA-RV1XA-TE, March 2005)

Installing and Configuring the HSG Agent
154 HSG80 ACS Solution Software V8.8 for Windows NT, Windows 2000, and Windows Server
2003 (32-bit) Installation and Configuration Guide
Note: If you want to enable the Agent to start at system boot, change the startup type
to automatic.
From Windows NT
1. Double click Services in Control Panel.
2. Double click
Steam. The Service window appears. Select Manual under
Startup Type, and click
OK.
From Windows 2000 and Windows Server 2003 (32-bit)
1. Click Start > Settings > Control Panel > Administrative Tools > Component
Services.
2. Under Console Root, select Services (Local).
3. Under Services (Local), right-click
Steam.
4. From the drop-down menu, select Properties. The Steam (Local Computer)
window appears.Under the General tab, select Manual from the Startup Type
drop-down menu and then Click
OK.
Removing the Agent
1. On Windows NT 4.0, double click the Add/ Remove Programs icon in the
Control Panel. The Add/Remove Program Properties window appears.
2. On Windows 2000, click Start > Settings > Control Panel > Add/Remove
Programs. On Windows Server 2003 (32-bit) (click Start > Control Panel >
Add/Remove Programs). The Add/ Remove Program window appears.
3. Select StorageWorks CC HS Series Agent in the window.
4. On Windows NT 4.0, click
Add/Remove.
5. On Windows 2000/Server 2003 (32-bit), click
Change/Remove.
Follow the instructions on the screen. The HS Series Agent is removed.