HP StorageWorks HSG80 ACS Solution Software V8.8 for Windows NT, Windows 2000, and Windows Server 2003 (32-bit) Installation and Configuration Guide (AA-RV1XA-TE, March 2005)

Installing, Configuring, and Removing the Client
231HSG80 ACS Solution Software V8.8 for Windows NT, Windows 2000, and Windows Server
2003 (32-bit) Installation and Configuration Guide
Note: You can create virtual disks by using the Storage Window. For more information
on the Storage Window, refer to
HP StorageWorks Command Console Version 2.5,
User Guide
.
Removing Command Console Client
Before you remove the Command Console Client (CCL) from the computer,
remove AES. This will prevent the system from reporting that a service failed to
start every time the system is restarted. Steps 2 through 5 describe how to remove
the CCL.
Note: When you remove the CCL, the SWCC2.MDB file is deleted. This file contains
the Navigation Tree configuration. If you want to save this information, move the file to
another directory.
1. Click Start > Programs > Command Prompt and change to the directory in
which you installed the CCL.
2. Enter the following command:
C:\Program Files\Compaq\SWCC> AsyncEventService -remove
3. Do one of the following:
— On Windows NT 4.0, click Start > Settings > Control Panel, and
double-click the Add/Remove Programs icon in the Control Panel. The
Add/Remove Program Properties window appears.
— On Windows 2000, click Start > Settings > Control Panel > Add/Remove
Programs. The Add/Remove Program window appears.
4. Select Command Console in the window.
5. Do one of the following:
— On Windows NT 4.0, click Add/Remove.
— On Windows 2000 and Windows Server 2003 (32-bit), click
Change/Remove.
6. Follow the instructions on the screen.