HP StorageWorks HSG80 ACS Solution Software V8.8 for Windows NT, Windows 2000, and Windows Server 2003 (32-bit) Installation and Configuration Guide (AA-RV1XA-TE, March 2005)

Configuring Windows NT/Windows 2000/Windows 2003 (32-bit) Clusters
249HSG80 ACS Solution Software V8.8 for Windows NT, Windows 2000, and Windows Server
2003 (32-bit) Installation and Configuration Guide
Example 1 – Changing arbitrated loop physical address settings
HSG80>Set This_Controller Port_1_AL_PA=73
HSG80>Set This_Controller Port_2_AL_PA=74
Note: You must restart both of your HSG80 controllers if you change the port
topology or AL_PA settings.
Figure 57: Controllers Settings for Second Storage RAID Array System
Verifying Storage Unit Access for A Cluster Configuration
In a Windows NT/Windows 2000/Windows Server 2003 (32-bit) cluster
configuration, you need to enable multiple host access to all storage units that will
be shared by both Windows NT/Windows 2000/Windows Server 2003 (32-bit)
cluster servers. You can either specify the hosts connection names of the two
cluster servers when using the StorageWorks Command Console or you can