HP StorageWorks HSG80 ACS Solution Software V8.8 for Windows NT, Windows 2000, and Windows Server 2003 (32-bit) Installation and Configuration Guide (AA-RV1XA-TE, March 2005)

Configuring Windows NT/Windows 2000/Windows 2003 (32-bit) Clusters
269HSG80 ACS Solution Software V8.8 for Windows NT, Windows 2000, and Windows Server
2003 (32-bit) Installation and Configuration Guide
3. Verifying the Storage Units have access to all host connections
Using the StorageWorks Command Console utility to create your storage
partitions will, by default, restrict host access to the storage devices. To check
host access, issue the CLI command as shown in Example 1.
Example 1 – Viewing Device Unit Information
HSG80> Show Units Full
If your device units have a host access of none or restrict access to a specific
host connection name, then modify each device units to allow for all host
access capabilities. Example 2 shows how to modify device unit D0 to allow
unlimited hosts access. You will need to issue this command for each device
storage unit.
Example 2 – Modifying access to your device units
HSG80>Set D0 Enable_Access = ALL
HSG80>
show this_controller