HP StorageWorks HSG80 ACS Solution Software V8.8 for Windows NT, Windows 2000, and Windows Server 2003 (32-bit) Installation and Configuration Guide (AA-RV1XA-TE, March 2005)

Installing, Configuring, and Removing the Client
229HSG80 ACS Solution Software V8.8 for Windows NT, Windows 2000, and Windows Server
2003 (32-bit) Installation and Configuration Guide
Adding Storage Subsystem and its Host to Navigation Tree
The Navigation Tree enables you to manage storage over the network by using the
Storage Window. If you plan to use pager notification, you must add the storage
subsystem to the Navigation Tree.
1. Verify that you have properly installed and configured the HS-Series Agent on
the storage subsystem host.
2. Click Start > Programs > Command Console > StorageWorks Command
Console. Client displays the Navigation Window. The Navigation Window
lets you monitor and manage many storage subsystems over the network.
Figure 47: Navigation Window
3. Click File > Add System. The Add System window appears.
4. Type the host name or its TCP/IP address and click Apply.
5. Click
Close.