HP StorageWorks HSG80 ACS Solution Software V8.8 for Windows NT, Windows 2000, and Windows Server 2003 (32-bit) Installation and Configuration Guide (AA-RV1XA-TE, March 2005)

Configuring Windows NT/Windows 2000/Windows 2003 (32-bit) Clusters
257HSG80 ACS Solution Software V8.8 for Windows NT, Windows 2000, and Windows Server
2003 (32-bit) Installation and Configuration Guide
Temporarily Removing Drive Letter Assignments
1. Start the Disk Administrator. shows the Disk Administrator window
displaying current partitions.
2. Label your partitions if they are not already labeled, so that you can
distinguish each one.
3. Record the drive letters currently associated with each of the partition labels.
4. Click on an NTFS partition that exists on your Enterprise & Modular Storage
RAID Array system.
5. Select Tools > Assign Drive Letter.
The Assign Drive Letter dialog box appears, similar to Figure 61.
Figure 61: Assign Drive Letter
6. Click Do not assign a drive letter (as shown in Figure 61) and then click OK.
Caution: Do not remove the drive letters for any drive that is not connected to
your Enterprise & Modular Storage RAID Array.
A confirmation dialog box appears as shown in Figure 62.