HP StorageWorks HSG80 Enterprise Modular Storage RAID Array Fibre Channel Solution Software V8.8 for Sun Solaris Release Notes (AA-RV1SA-TE, March 2005)

Hardware and Software Support
31HSG80 Enterprise Modular Storage RAID Array Fibre Channel Solution Software V8.8 for Sun
Solaris Release Notes
Additional information regarding hardware specifications can be found at
http://h18006.www1.hp.com/products/storageworks/acs/related.html .
Disk Device Support
To retrieve the latest list of devices supported with HSG60 and HSG80 array
controllers:
1. Go to the following link:
http://h18006.www1.hp.com/products/storageworks/softwaredrivers/acs/
2. Select the manuals (guides, supplements, addendum, etc) link under
self-help resources.
3. Select the HSG60, HSG80, HSJ80, HSZ80 Supported Disk Drive Matrix
link.
Switch Support
This Fibre Channel Solution Kit supports the Fibre Channel switches and
firmware versions listed in the HP StorageWorks SAN Design Reference Guide
and SAN Product Support Matrix at
http://h18006.www1.hp.com/storage/saninfrastructure.html .
System Components
This Fibre Channel Solution Software Kit supports the system components and
operating system versions listed in Table 6.
Table 6: Minimum System Requirements
Component Requirement
Controller
Compatibility
StorageWorks HSG80 Array Controller, ACS V8.8-1 (or a
subsequently patched version of ACS V8.8-1)
Platform Sun 4u Architecture only.
Operating
System
Sun Solaris 32-bit Mode: V2.6, V2.7 (Solaris 7), V2.8 (Solaris 8),
V2.9 (Solaris 9)
Sun Solaris 64-bit Mode: V2.7, V2.8, V2.9
Sun Clusters V2.2 (2.6, 2.7, 2.8), V3.1 (Solaris 9, FCA2257P only)
Veritas Clusters V3.5
Topology Fibre Channel Switched (FC-SW)
Fibre Channel Arbitrated Loop (FC-AL)