Fabric OS Administrator's Guide v7.0.0 (53-1002148-02, June 2011)

180 Fabric OS Administrator’s Guide
53-1002148-02
Configuration settings
8
If your user account has chassis account permissions, you can do any of the following when
uploading or downloading a configuration file:
Configuration file format
The configuration file is divided into three areas: the header, the chassis section, and one or more
switch sections.
CAUTION
If you have Virtual Fabrics enabled, you must follow the procedure in “Configuration management
for Virtual Fabrics” on page 188 to restore the logical switches.
Example of a configuration file
[Configuration upload Information]
Configuration Format = 3.0
Minimum Compatible Format = 3.0
Excluding Format = 0.0
date = Tue Mar 1 15:53:18 2011
FOS version = v7.0.0.0
Number of LS = 2
[Chassis Configuration Begin]
[fcRouting]
[Chassis Configuration]
[LicensesDB]
[Bottleneck Configuration]
[DMM_WWN]
[Licenses]
[Chassis Configuration End]
date = Thu Apr 2 21:28:52 2009
[Switch Configuration Begin : 0]
SwitchName = Sprint5100
Fabric ID = 128
[Boot Parameters]
-fid To upload the specified FID configuration.
-all To upload all of the system configuration, including the chassis section
and all switch sections for all logical switches.
Note: Use this parameter when obtaining a complete capture of the switch
configuration in a switch that has Virtual Fabric mode disabled.
-chassis To upload only the chassis section of the system configuration file.