Fabric OS Administrator's Guide v7.0.0 (53-1002148-02, June 2011)
Fabric OS Administrator’s Guide 193
53-1002148-02
Chapter
9
Installing and Maintaining Firmware
In this chapter
•Firmware download process overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193
•Preparing for a firmware download . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196
•Firmware download on switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 198
•Firmware download on an enterprise-class platform . . . . . . . . . . . . . . . . . 200
•Firmware download from a USB device . . . . . . . . . . . . . . . . . . . . . . . . . . . . 203
•FIPS Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 204
•Test and restore firmware on switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . 206
•Test and restore firmware on enterprise-class platforms . . . . . . . . . . . . . . 208
•Validating a firmware download . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211
Firmware download process overview
Fabric OS v7.0.0 provides nondisruptive firmware installation.
This chapter refers to the following specific types of blades inserted into the Brocade DCX, DCX-4S,
or DCX 8510 Backbone platforms:
• FC blades or port blades that contain only Fibre Channel ports; the Brocade FC10-6 and the
Brocade FC8-16, FC8-32, FC8-48, and FC8-64.
• AP blades contain extra processors and specialized ports: Brocade FR4-18i, FA4-18,
FCOE10-24, and FX8-24.
• CP blades have a control processor (CP) used to control the entire switch; CP blades can be
inserted only into slots 6 and 7 on the Brocade DCX or DCX 8510-8, and slots 4 and 5 on the
Brocade DCX-4S or DCX 8510-4.
• CORE8 and CR4S-8 core blades provide ICL functionality between two Brocade DCX
Backbones. CORE8 blades can be inserted only into slots 5 and 8 on the Brocade DCX. CR4S-8
blades can be inserted only into slots 3 and 6 on the Brocade DCX-4S.
• CORE8 and CR4S-8 core blades provide ICL functionality between two Brocade DCX 8510-8
Backbones. CORE8 blades can be inserted only into slots 5 and 8 on the Brocade DCX. CR4S-8
blades can be inserted only into slots 3 and 6 on the Brocade DCX 8510-4.
NOTE
For more information on troubleshooting a firmware download, refer to the Fabric OS
Troubleshooting and Diagnostics Guide.