Fabric OS Administrator's Guide v7.0.0 (53-1002148-02, June 2011)

262 Fabric OS Administrator’s Guide
53-1002148-02
Zone object maintenance
11
21:00:00:20:37:0c:76:22
21:00:00:20:37:0c:76:28
zone: Purple_zone
1,0
21:00:00:20:37:0c:76:85
21:00:00:20:37:0c:71:df
Clearing all zone configurations
1. Connect to the switch and log in as admin.
2. Enter the cfgClear command to clear all zone information in the transaction buffer.
ATTENTION
Be careful using the cfgClear command because it deletes the defined configuration.
switch:admin> cfgclear
The Clear All action will clear all Aliases, Zones, FA Zones
and configurations in the Defined configuration.
Run cfgSave to commit the transaction or cfgTransAbort to
cancel the transaction.
Do you really want to clear all configurations? (yes, y, no, n): [no]
3. Enter one of the following commands, depending on whether an effective zone configuration
exists:
• If no effective zone configuration exists, enter the cfgSave command.
• If an effective zone configuration exists, enter the cfgDisable command to disable and
clear the zone configuration in nonvolatile memory for all switches in the fabric.
Zone object maintenance
The following procedures describe how to copy, delete, and rename zone objects. Depending on
the operation, a zone object can be a zone member, a zone alias, a zone, or a zone configuration.
Copying a zone object
When you copy a zone object, the resulting object has the same name as the original. The zone
object can be a zone configuration, a zone alias, or a zone.
1. Connect to the switch and log in as admin.
2. Enter the cfgShow command to view the zone configuration objects you want to copy.
cfgshow "pattern"[, mode]
For example, to display all zone configuration objects that start with “Test”:
switch:admin> cfgshow "Test*"
cfg: Test1 Blue_zone
cfg: Test_cfg Purple_zone; Blue_zone