Fabric OS Administrator's Guide v7.0.0 (53-1002148-02, June 2011)

Fabric OS Administrator’s Guide 381
53-1002148-02
10G licensing
18
6510-switch:admin> portcfgoctetspeedcombo 2
6510-switch:admin> portcfgspeed 2 10
6510-switch:admin>
Enabling the 10 GbE ports on an FX8-24 blade
To enable the 10 GbE ports on an FX8-24 blade, follow these steps:
1. Connect to the Brocade enterprise-class platform and log in using an account with admin
permissions, or an account with OM permissions for the license class of RBAC commands.
2. Use the licenseAdd command to add the 10G license.
3. Use the licenseShow command to check the results of automatic license assignment. If the
results are not what you intended, use the licenseSlotCfg command to reassign the license to
the desired FX8-24 blades.
4. Use the licenseShow command to verify the license.
5. Use the bladeCfgGeMode --set <mode> command to configure the GbE port mode for the
FX8-24 blade. To enable the 10GbE ports, set the <mode> parameter to one of the following:
10g—enables both 10 GbE ports, disables all ten 1GbE ports.
dual—enables the xge0 port (but not xge1) and also enables all ten 1 GbE ports.
Example of assigning a 10G license on an FX8-24 extension blade and enabling both 10 GbE ports
This example assigns a license to slot 7 on a DCX 8510-4 Backbone and enables both 10 GbE
ports on the FX8-24 blade in that slot. In this example, the license was first automatically assigned
to slot 1.
8510-4switch:admin> licenseadd aTFPNFXGLmABANMGtT4LfSBJSDLWTYD3EFrr4WGAEMBA
8510-4switch:admin> licenseshow
aTFPNFXGLmABANMGtT4LfSBJSDLWTYD3EFrr4WGAEMBA
10 Gigabit FCIP/Fibre Channel (FTR_10G) license
Capacity 1
Consumed 1
Configured Blade Slots 1
8510-4switch:admin> licenseslotcfg -remove FTR_10G 1
8510-4switch:admin> licenseslotcfg -add FTR_10G 7
8510-4switch:admin> licenseshow
aTFPNFXGLmABANMGtT4LfSBJSDLWTYD3EFrr4WGAEMBA
10 Gigabit FCIP/Fibre Channel (FTR_10G) license
Capacity 1
Consumed 1
Configured Blade Slots 7
8510-4switch:admin> bladecfggemode --set 10G -slot 7
8510-4switch:admin> switchshow -slot 7
158 7 30 019e00 -- -- Offline VE
159 7 31 019f00 -- -- Offline VE
7 ge0 -- 1G No_Module FCIP Disabled (10G Mode)
7 ge1 -- 1G No_Module FCIP Disabled (10G Mode)
7 ge2 -- 1G No_Module FCIP Disabled (10G Mode)
7 ge3 -- 1G No_Module FCIP Disabled (10G Mode)
7 ge4 -- 1G No_Module FCIP Disabled (10G Mode)
7 ge5 -- 1G No_Module FCIP Disabled (10G Mode)
7 ge6 -- 1G No_Module FCIP Disabled (10G Mode)
7 ge7 -- 1G No_Module FCIP Disabled (10G Mode)