Manualshelf

Fabric OS Administrator's Guide v7.0.0 (53-1002148-02, June 2011)

ManualsBrandsHP ManualsSoftwareHP StorageWorks ISL quick loop
471472473474475476477478479480
Fabric OS Administrator’s Guide 439
53-1002148-02
F_Port trunking
21
Figure 72 shows a switch in AG mode without F_Port masterless trunking. Figure 73 shows a
switch in AG mode with F_Port masterless trunking.
FIGURE 72 Switch in Access Gateway mode without F_Port trunking
FIGURE 73 Switch in Access Gateway mode with F_Port masterless trunking
NOTE
You do not need to manually map the host to the master port because Access Gateway will perform
a cold failover to the master port.
See “Configuring F_Port trunking for Access Gateway” on page 443 for instructions on configuring
F_Port trunking.
Requirements for F_Port trunking on an Access Gateway
In addition to the requirements listed in “Requirements for trunk groups” on page 429, note the
following requirements, which are specific to F_Port trunking on an Access Gateway:
• The Access Gateway module must have the Trunking license enabled.