HP StorageWorks LUN Configuration and Security Manager XP user guide for the XP10000/XP12000 (December 2005)

LUN Configuration and Security Manager XP user guide for the XP10000/XP12000 55
The status of each LDEV is indicated by one of the following icons.
The table contains the following information:
• No.: The number of a volume in the VDEV
• CU:LDEV: A CU number/LDEV number combination. Free indicates a free space. If an LDEV number
ends with # (for example, 00:01#), the LDEV is an external LU. If an LDEV number ends with V (for
example, 00:00V), the LDEV is a virtual volume. For more information about virtual volumes, see the
HP StorageWorks Snapshot XP User Guide.
• Emulation: Emulation type of the volume
• Capacity: Capacity of the volume represented in the selected unit (MB, Cyl, or block)
• Paths: Number of LU paths that the volume has. This box is blank when the volume has no LU paths.
• Access Attribute: Access attribute of the volume
• Status: Status of the volume. You must click LDEV Status to display the volume status. Table 26 describes
the volume status displayed in the Status column.
Capacity unit list
The Capacity Unit list allows you to select the unit (MB, Cyl, or block) to display for volume capacity.
When you manipulate mainframe volumes, you can only select Cyl.
Buttons
• Apply: Registers the VSC settings
• Cancel: Cancels the VSC settings
• LDEV Status: Displays the current volume status
Table 25 LDEV status icons for VSC operations
Icon Status
Normal LDEV
LUSE volume
LDEV reserved for Auto LUN
VSC volume
VSC volume reserved for Auto LUN
Free space
Table 26 Volume status
Status Description
Normal Volume is in a normal status.
Blocked Volume is in a blocked status. Hosts cannot access the blocked volume.
Warning Volume has a problem.
Format Volume is being formatted.
Correction Access Volume’s access attribute is being changed.
Copying Volume’s data is being copied.
Read Only Hosts can only read the volume. Hosts cannot write any data to the volume.
Shredding The Shredding operation is in progress.
Unknown System does not recognize the volume’s status.