HP StorageWorks Enterprise File Services WAN Accelerator 3.0.4 installation and configuration guide (AG424-96004, March 2007)

HP STORAGEWORKS EFS WAN ACCELERATOR INSTALLATION AND CONFIGURATION GUIDE 37
2 - INSTALLING AND
C
ONFIGURING THE HP EFS
4. The system confirms your settings.
You have entered the following information:
1. Hostname: minna
2. Use DHCP on primary interface: no
3. Primary IP address: 10.10.10.6
4. Netmask: 255.255.0.0
5. Default gateway: 10.0.0.1
6. Primary DNS server: 10.0.0.2
7. Domain name: example.com
8. Admin password: (unchanged)
9. SMTP server: natoma
10. Notification email address: [e-mail]
11. Set the primary interface speed: auto
12. Set the primary interface duplex: auto
13. Would you like to activate the in-path configuration: yes
14. In-Path IP address: 10.11.11.6
15. In-Path Netmask: 255.255.0.0
16. In-Path Default gateway:
17. Set the in-path:LAN interface speed: auto
18. Set the in-path:LAN interface duplex: auto
19. Set the in-path:WAN interface speed: auto
20. Set the in-path:WAN interface duplex: auto
To change an answer, enter the step number to return to.
Otherwise hit <enter> to save changes and exit.
Choice:
The HP EFS WAN Accelerator configuration wizard automatically saves your
configuration settings.
5. To log out of the system, enter the following command at the system prompt:
minna> exit
Step 15: In-Path Netmask? Enter the in-path netmask address.
Step 15: In-Path Netmask?
[255.255.0.0]
Step 16: In-Path Default gateway? Enter the in-path default gateway (the
WAN gateway).
Step 16: In-Path Default
Gateway?
Step 17: Set the in-path:LAN
interface speed?
Enter the in-path, LAN interface speed.
Make sure this value matches the settings
on your router or switch.
The default value is auto.
Step 17: Set the in-path:LAN
interface speed? [auto] auto
Step 18: Set the in-path:LAN
interface duplex?
Enter the in-path, LAN duplex. Make sure
this value matches the settings on your
router or switch.
The default value is auto.
Step 18: Set the in-path:LAN
interface duplex? [auto] auto
Step 19: Set the in-path:WAN
interface speed?
Enter the in-path, WAN interface speed.
Make sure this value matches the settings
on your router or switch.
The default value is auto.
Step 19: Set the in-path:WAN
interface speed? [auto] auto
Step 20: Set the in-path:WAN
interface duplex?
Enter the in-path, WAN duplex speed.
Make sure this value matches the setting
on your router or switch.
The default value is auto.
Step 20: Set the in-path:WAN
interface duplex? [auto] auto