HP StorageWorks Enterprise File Services WAN Accelerator 3.0.4 installation and configuration guide (AG424-96004, March 2007)

50 2 - INSTALLING AND CONFIGURING THE HP EFS WAN ACCELERATOR
You can verify that SMB signing has been disabled on your Domain Controllers,
member servers, and clients. The following procedures assume that you have installed
and configured the HP EFS WAN Accelerators in your network.
To verify that SMB
signing has been
disabled
1. Copy some files from the server to the client through the HP EFS WAN
Accelerators.
2. To check for protocol errors, click Reports to display the Reports: Bandwidth
Optimization page.
3. Under Network, click Current Connections to display the Reports: Network -
Current Connections page.
4. Check for protocol errors. Protocol errors appear with a red triangle next to the
connection.
5. If you have protocol errors:
 Disable Digitally sign client communication (always) and Digitally sign
server communication (always).
 Disable Digitally sign client communication (when possible) and Digitally
sign server communication (when possible).