Manualshelf

HP StorageWorks Enterprise File Services WAN Accelerator 3.0.4 installation and configuration guide (AG424-96004, March 2007)

ManualsBrandsHP ManualsSoftwareHP StorageWorks M100 WAN Accelerator Manager LTU
51525354555657585960
HP STORAGEWORKS EFS WAN ACCELERATOR INSTALLATION AND CONFIGURATION GUIDE 57
3 - TROUBLESHOOTING
I
NSTALLATION PROBLEMS
That the bypass service is enabled. For example, at the system prompt, enter the
show service CLI command. To enable the service if it is not running, use the
CLI command service enable.
That the bypass card is visible to the hardware. For example, at the system
prompt, enter the show hardware CLI command.
Similar
Problems
See also the following sections which describe similar problems:
“Problem: Number of Errors on an Interface is 4294967295” on page 53
“Problem: HP EFS WAN Accelerator Blocks Traffic When Switching To Bypass
Mode” on page 54