HP StorageWorks Enterprise File Services WAN Accelerator 3.0.4 installation and configuration guide (AG424-96004, March 2007)

66 A - STATUS LIGHTS, TECHNICAL SPECIFICATIONS, AND REGULATORY INFORMATION
Bypass Card Status Lights
The HP EFS WAN Accelerator is equipped with one of the following types of bypass
interfaces (depending on your order):
 HP EFS N2c WAN Accelerator 2-port NIC Card
 HP EFS N2f WAN Accelerator 2-port NIC Card
 HP EFS N4c WAN Accelerator 4-port NIC Card
HP EFS N2c
WAN
Accelerator 2-
port NIC Card
The following section describes the HP EFS N2c WAN Accelerator 2-port NIC Card
status lights.
Figure 5-3. HP EFS N2c WAN Accelerator 2-port NIC Card
The following table describes the HP EFS N2c WAN Accelerator 2-port NIC Card
Light-Emitting Diode (LED) lights. The left column of LED lights corresponds to the
left port and the right column of LED lights corresponds to the right port.
WAN
LAN
Status Top LED (Green) Middle LED (Green) Bottom LED (Green)
Network Link Not
Established
Off Off Off
Network Link Established On n/a n/a
Network Link Active Flashing n/a n/a
100 Mbps (100 Base T)
Link
On On Off
1000 Mbps (1000 Base T)
Link
On Off On
Bypass Mode Off On On