HP StorageWorks Enterprise File Services WAN Accelerator Deployment Guide (November 2005)

102 9 - RADIUS AND TACACS+ AUTHENTICATION
Configuring
RADIUS
Authentication
The following section describes the basic steps for configuring RADIUS
authentication in the HP EFS WAN Accelerator.
You prioritize RADIUS authentication methods for the system and set the
authorization policy and default user.
IMPORTANT: Make sure to put the authentication methods in the order in which you
want authentication to occur. If authorization fails on the first method, the next method
is attempted, and so forth, until all the methods have been attempted.
Basic Steps 1. Configure the HP EFS WAN Accelerator. For detailed information, see the
HP EFS WAN Accelerator Installation and Configuration Guide.
2. Connect to the Management Console. For detailed information, see the HP
EFS WAN Accelerator Installation and Configuration Guide.
3. Navigate to the Setup: Authentication - General Settings page in the
Management Console.
4. Define the default login and the authentication methods. Make sure you
put the authentication methods in the order in which you want them to
occur. If authorization fails on the first method, the next method is
attempted, and so forth, until all the methods have been attempted.
Figure 9-1. Setup: Authentication - General Settings Page