HP StorageWorks Enterprise File Services WAN Accelerator Deployment Guide (November 2005)

HP EFS WAN ACCELERATOR DEPLOYMENT GUIDE 103
9 - RADIUS AND TACACS+
A
UTHENTICATION
5. Navigate to the Setup: Authentication - Radius Servers page.
6. Specify the Server IP address, the authentication port, server key, time-out
interval, retry interval, and, optionally, global settings.
Figure 9-2. Setup: Authentication - RADIUS Servers Page
7. Click Save.
Configuring TACACS+ Authentication
in the HP EFS WAN Accelerator
The following section provides the basic steps for configuring TACACS+
authentication in the HP EFS WAN Accelerator.
Configuring
TACACS+
Authentication
The following section describes the basic steps for configuring TACACS+
configuration in the HP EFS WAN Accelerator.
You prioritize TACACS+ authentication methods for the system and set the
authorization policy and default user.
IMPORTANT: Make sure to put the authentication methods in the order in which you
want authentication to occur. If authorization fails on the first method, the next method
is attempted, and so forth, until all the methods have been attempted.