HP StorageWorks Enterprise File Services WAN Accelerator Deployment Guide (November 2005)

HP EFS WAN ACCELERATOR DEPLOYMENT GUIDE 23
2 - IN-PATH DEPLOYMENTS
Basic Steps
(Client-Side)
Perform the following steps for each client-side HP EFS WAN Accelerator.
1. Configure the HP EFS WAN Accelerator as an in-path device. For detailed
information, see the HP EFS WAN Accelerator Installation and Configuration
Guide.
2. Connect to the Management Console. For detailed information, see the HP
EFS WAN Accelerator Management Console User Guide.
3. Navigate to the Setup: Advanced Networking - Failover Settings page in
the Management Console.
4. Enable failover support. For example:
 On HP EFS WAN Accelerator A: specify HP EFS WAN Accelerator A
as the master and specify the in-path IP address of HP EFS WAN
Accelerator B as the backup (other) IP address.
 On HP EFS WAN Accelerator B: specify HP EFS WAN Accelerator B as
the backup (other) and specify the in-path IP address of HP EFS WAN
Accelerator A as the master IP address.
Figure 2-3. Setup: Advanced Networking - Failover Settings Page
5. Enable Automated Online Datastore Synchronization. For example:
 Select Master or Backup from the Current Appliance is the drop-down
list.
 Type a port number in the Synchronization Port text box. The default
value is 7744.