HP StorageWorks Enterprise File Services WAN Accelerator Deployment Guide (November 2005)

40 4 - OUT-OF-PATH NETWORK DEPLOYMENTS
3. Navigate to the Setup: Optimization Service - In-Path Rules page in the
Management Console.
Figure 4-7. Setup: Optimization Service - In-Path Rules Page
4. Define in-path, fixed-target rules for traffic you want to optimize. For
example:
 Select start, end, or a rule number from the Insert Rule At drop-down
list to insert a rule in the Rules list. When you specify a particular rule
number, the rule is placed after the rule number you specified and
before the default auto-discover rule.
 Type the IP address for the source subnet in the Source Subnet text
box. Use the following format: 0.0.0.0/0.
 Type the IP address and port for the destination subnet, in the
Destination Subnet and Port text boxes. To specify all ports, type all in
the Port text box.
 Under Targets, type the IP address and port number for the HP EFS
WAN Accelerator that is the peer in the Target Appliance IP and Port
text boxes. The IP address must be the Primary Port IP address on the
target HP EFS WAN Accelerator. The default port is 7810.