HP StorageWorks Enterprise File Services WAN Accelerator Deployment Guide (November 2005)

HP EFS WAN ACCELERATOR DEPLOYMENT GUIDE 41

4 - OUT-OF-PATH NETWORK

EPLOYMENTS

 If you have a backup, out-of-path HP EFS WAN Accelerator in your

system (failover support), type the IP address and port for the backup

appliance in the Backup Appliance IP and Port text boxes. Use the

following format: 0.0.0.0/0. The default port is 7810.

5. Apply and save the new configuration in the Management Console.

6. Begin optimization. View performance reports and system logs in the

Management Console.

Basic Steps

(Server-Side)

The server-side HP EFS WAN Accelerator is configured as an out-of-path

device. For detailed information, see the HP EFS WAN Accelerator Installation

and Configuration Guide.

1. Navigate to the Setup: Optimization Service - General Settings page in the

Management Console.

2. Enable out-of path support click Enable Out-of-Path Support.

Figure 4-8. Setup: Optimization Service - General Settings Page