HP StorageWorks Enterprise File Services WAN Accelerator Deployment Guide (November 2005)

HP EFS WAN ACCELERATOR DEPLOYMENT GUIDE 61
7 - WCCP DEPLOYMENTS
CHAPTER 7 WCCP Deployments
In This Chapter This chapter describes how to configure the Web Cache Communication
Protocol (WCCP) to redirect traffic to an HP EFS WAN Accelerator or group
of HP EFS WAN Accelerators. It contains the following sections:
 “Introduction to WCCP,” next
 “A Basic WCCP Configuration” on page 66
 “Configuring WCCP Using the Management Console” on page 68
 “Dual WCCP Deployment” on page 73
 “Additional WCCP Features” on page 76
 “Troubleshooting” on page 79
This chapter assumes you are familiar with the HP EFS WAN Accelerator
Management Console (Management Console). For detailed information about
the Management Console and how to use it, see the HP EFS WAN Accelerator
Management Console User Guide.
This chapter also assumes that you are familiar with the installation and
configuration process for the HP EFS WAN Accelerator. For detailed
information, see the HP EFS WAN Accelerator Installation and Configuration
Guide.
This chapter provides the basic steps for WCCP network deployments. It does
not provide detailed procedures. Use this chapter as a general guide to these
deployments. If you need additional assistance, contact HP technical support
located at http://www.hp.com.
For detailed information about the factors you must consider before you
design and deploy the HP EFS WAN Accelerator in a network environment,
see “Design and Deployment Overview” on page 15.