HP StorageWorks Enterprise File Services WAN Accelerator 2.1.
Legal and notice information © Copyright 2006 Hewlett-Packard Development Company, L.P. © Copyright 2003–2006 Riverbed Technology, Inc. Hewlett-Packard Company makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
About this document This section describes the content in this document, including: • Release notes information, page 3 • Intended audience, page 3 • Accessing future product updates, page 3 • Other documentation, page 3 Release notes information These release notes contain the following major topics: • Hardware and software requirements, page 4 • New features in version 2.1.11, page 4 • New features in version 2.1.9, page 4 • New features in version 2.1.7, page 4 • New features in version 2.1.
• HP StorageWorks Enterprise File Services WAN Accelerator Manager User Guide describes how to install, configure, and administer a network made up of multiple HP EFS WAN Accelerators using the HP StorageWorks Enterprise File Services WAN Accelerator Manager. • HP StorageWorks Enterprise File Services WAN Accelerator Bypass NIC Installation Guide describes how to install bypass cards in the HP EFS WAN Accelerator.
New features in version 2.1.5 The following features are available in this release: Support for new models Support for the DL320-520, DL320-1020, and DL320-2020 models has been added. These new models, based on HP ProLiant DL320 G4 servers, provide greater optimized bandwidth and TCP connections. The DL320-520 supports 1Mbps bandwidth and 300 connections (150 with PFS enabled). The DL320-1020 supports 2Mbps bandwidth and 625 connections (200 with PFS enabled).
Serial clustering You can provide increased optimization capacity by deploying several HP EFS WAN Accelerators back-to-back in an in-path configuration to create a serial cluster. HP strongly recommends you use DL380-5010 HP EFS WAN Accelerators in serial clustering deployments. Port labeling You can assign a port label to a range of ports when you define configuration rules in the HP EFS WAN Accelerator.
Job scheduling Jobs are HP EFS WAN Accelerator command-line interface (CLI) commands that are scheduled to execute at a time you specify. You can schedule software upgrades in the Management Console or in the CLI; you must schedule all other jobs using the CLI only. You can view pending, inactive, and completed jobs in the Management Console. Connection Pooling Connection Pooling enables you to save an extra round-trip across the WAN for an initial connection.
• CIFS performance degradation occurs with multiple sets (pairs) of in-path HP EFS WAN Accelerators (Bug #3746). For example: client->DL320-2010->WAN->DL320-2010->DL320-1010->DL320-2010->server This problem is dependent on this configuration. Contact HP Technical Support for further information at http://www.hp.com. Upgrading from version 1.2.6 to version 2.1.11 Version 2.1.11 interoperates with version 1.2.6.
SH2 (config) # peer version min 6 SH2 (config) # peer version max 6 SH2 (config) # write memory SH2 (config) # restart 9.
NOTE: If you upgrade the remaining WAN Accelerators in your network (WAN Accelerator-5 through WAN Accelerator-10), and there are no more version 1.2.6 WAN Accelerators, you can remove all the version configurations on WAN Accelerator-1 through WAN Accelerator-4. 1. Connect to the Management Console on each WAN Accelerator. 2. Install the version 2.1.11 image in the Setup: Software Upgrade page. 3. Save the current configuration in the Setup: Configuration Manager page. 4.
IMPORTANT: If you are downgrading to a previous version of the HP EFS WAN Accelerator software, you must downgrade to a version of the software that has previously run on your machine. For example, you cannot upgrade from version 1.2.3 to version 2.0 or version 2.1 and downgrade to version 1.2.8. You must downgrade to version 1.2.3. and then upgrade to version 1.2.8. If you do not follow this step, your configuration will be discarded and unrecoverable.
Synchronization with Standalone PFS shares Synchronization with a Standalone PFS share may not work correctly. If using Standalone shares and synchronization, verify that it is working properly, or choose a different type of PFS share when using synchronization. Setting the system date/time When setting the system date/time in the web based GUI, if the date and time is significantly off, when set to the current date and time, the GUI will log the user off.
Resolved issues Version 2.1.10 n64 to Version 2.1.11 n68 7083 Fixed a CIFS problem that causes log messages like "[smbsfe/file.NOTICE] 68288 {10.30.10.1:1716 10.10.10.1:445} Still has pending request count_ :". 7205 Fixed a problem that may occur when renaming a directory in CIFS. 7917 Fixed a problem in MapAlloc::MapAlloc during a process relaunch. 10673 Fixed a problem where Landesk application fails when optimized. 11186 Fixed a problem during shutdown.
12909 Fixed PFS problem involving joining a domain. 12955 In the CLI command "pfs share configure", "mode" parameter now comes after the "frequency" parameter. 13020 Fixed a problem where Unicode character case conversion may not work properly. 13085 Log messages for MS-SQL include "MS-SQL". Version 2.1.9 n58 to Version 2.1.10 n64 5279 CLI handles long config names properly. 5855 Fixed problem with "Unknown event EVENT_CONNECTED while reading connect result" log message.
10614 Fixed some CLI commands that should only take interface names but were accepting any string. 10622 Turning off the option to reset existing connections on startup no longer causes the CLI and web interface to suggest restarting the service. 10760 Turning on WCCP while simplified routing is turned on is now refused with an error message. 10979 Fixed a problem killing 10000 connections in between the data transfer.
12185 Non syn packets are not checked for probes. 12205 Updated time zone information for 2007 changes in US daylight time. 12332 New option added to stop sending CDP frames on all interfaces if one is down. 12340 Added link state propogation. 12405 Fixed bug where connection counters are shown as zero in 2.1.8 and 2.1.9. Version 2.1.8 n54 to Version 2.1.9 n58 1667 Fixed MAPI error "Unexpected response from server in state=13". 3027 sshd no longer dies exactly one hour after boot.
8656 Fixed a problem in the initial configuration wizard where it gets stuck. 9065 Fixed a problem where the link state alarm status is inconsistent between CLI and web interface if the link state alarm is disabled. 9498 Reduced excessive PFS logs captured in a sysdump. 9531 Fixed some memory leaks in MAPI handling. 9817 Reordered "show config" output to have port-labels defined before any commands that may use port labels (e.g. qos commands).
10899 Fixed CVE-2006-3403, a possible remote denial of service vulnerability when PFS is enabled. 11007 Fixed a problem that occurs when in-path neighbor is enabled without a neighbor. 11084 "in-path kickoff" now reliably prevents CIFS connections from becoming "pre-existing" when service is (re)started. 11104 in-path rules description after backup-port is correctly handled. 11145 Fixed a simplified routing bug where WA was using wrong macmap table when sending syn,ack.
5803 WCCP L2 can be forced to return even if router does not advertise that capability. 5855 Fixed "Unknown event EVENT_CONNECTED while reading connect result" problem. 6022 Fixed image fetch timeout being too short. 6520 Fixed problem with MS-SQL disruption if only server side is enabled for MS-SQL optimization. 6664 Fixed CIFS problem with "last name offset" in the response is 0. 7046 Fixed some Radius login problems. 7357 "show stats alarm" now checks for invalid alarm names.
8712 Failed emails from WA no longer fill up root partition quickly. 9043 OpenSSH upgraded from 4.2p1 to 4.3p2. 9426 Fixed a problem when an FTP control connection is closed before its data connection with an out-of-path appliance. 9577 Fixed some excessive CIFS log messages ("logoff_andx still waiting"). 9586 Fixed a CLI problem with "show protocol ms-sql". 9801 Fixed "NativeOS_Version: Unknown OS dump pkt" log message. 9814 Fixed problem in Smb::Parser::read_timeout () after parse shutdown.
5633 When PFS is disabled, winbindd is now correctly stopped. 6263 "show pfs" commands now work in enable mode. 6715 "show connections
8156 Fixed share mode conflict when running "pfs share configure" without specifying a mode. 8169 Fixed problem with W2k3 shadow copy. 8199 Email is now correctly sent for full filesystem alarm. 8301 "show peers" licenses column has correct number of / characters. 8354 Fixed memory leak caused by frequent restarting (every 15 seconds). 8370 Fixed problem where a loop in RefUnpacker::DataNode::takedata causes high CPU usage.
4533 Some SNMP MIB bugs are fixed. 4880 Disconnected appliances are now properly removed from "Connected Appliances". 5217 "show version history" command is now available to show all previous installed builds. 6209 VoIP jitter problem fixed. 6253 service port may no longer be (incorrectly) settable to 0. 6677 Fixed MAPI problem where users see multiple duplicate emails being delivered (Outlook rule bug). 6848 Fixed WCCP problem where weights don't seem to have correct default values on GUI.
7742 Fixed MAPI problem where multiple e-mail moves to a network share fail (works one at a time). 7753 Correctly turn off link when bringing down interface. 7755 Default in-path rule position is now the end. 7766 Fixed problem with CIFS idle files not being closed causing CPU alarms and shutdown problems. 7778 Web UI has simplified routing settings. 7781 Wildcarded alarms are now showing properly on CLI and web UI. 7784 Fixed MAPI problem where attachment truncation happens in Group Mailbox.
8010 Security: user can access the shell via a command inside telnet. 8011 Fixed CIFS problem where Visio may crash. 8061 Fixed MAPI: "Fault received during read ahead." message that is flooding the server WA logs. 8092 Some TDI "done in proc" codes are handled more gracefully. 8099 Fixed MAPI 2003 problem in DataIterator::DataIterator () 8115 Fixed bad SSL directory creation on upgrade from pre rapanui 2.1.3. 8119 Fixed problem where Visual Fox Pro application fails.
6360 Added "no protocol cifs enable" and "no protocol mapi enable" commands. 6512 Fixed a problem where wdt process appears to crash every hour. 6760 Fixed problem where log shows "[decoder/refunpacker.ALERT] - {- -} ALARM 300922/169:1151794#0{N}1 was not defined". 6947 Fixed CIFS problem with Findfirst that returns Error 0xc0000022. 6980 Fixed problem sending or accessing MAPI attachments to/from Group Mailbox. 7209 SNMP data for PeerTable now has hostname, version, and model (were missing).
7554 Fixed deadlock under certain high latency conditions with bidirectional traffic. Symptoms are appliance going into bypass and close response on web and command line interfaces. 7555 Domain password is no longer given on command line where it may be visible. 7561 WCCP: Reduced inner connection MSS to avoid ip fragmentation. 7568 Added SNMP trap when entering or exiting configure mode. 7573 SNMP traps for CPU alarms now work.
7665 Fixed problem where MAPI 2003 readahead was slow for certain large images. 7668 Fixed MS-SQL leak when Unicode parameter parsing fails. 7689 Fixed MAPI warning: Fxsrcgetbuffer: Stray accelerated response in state 0.. 7670 Fixed problem where using "no port-label NAME port" to delete a non-existent port causes a crash. 7675 Fixed problem in MS-SQL: crash on TdsState::remap_id_ctos() during Microsoft Project use. 7692 Fixed problem regarding PFS samba audit module logging of file changes.
6699 Fixed a problem with MAPI handling that had caused a crash in cases of short packet transmission. This problem occurred only with MAPI versions earlier than MAPI2003. 6708 Fixed a problem in reporting duplex errors that had reported errors in cases where there were not errors. 6794 Fixed a memory leak and related rcu_helperd crash. 6836 Fixed a problem that caused a rule inserted with "dstport = 0" to be displayed as 'all' instead of '0'.
6986 Fixed a problem that had caused HP EFS WAN Accelerators to report a peer version mismatch for appliances with the same software version. 6997 Fixed a problem where CIFS acceleration was failing because the 8.3 file name is longer than the real file name. 7008 Fixed a problem that, when optimization was turned on, prevented opening a file in Excel if the file name contained Japanese characters. 7026 Fixed a problem that caused to crash to crash upon optimization shutdown.
7397 Fixed a problem with MAPI handling that had caused a crash related to short response packets. 7420 Fixed a problem with MAPI2003 handling that had caused a crash in some circumstances. 7424 Fixed a problem in the kernel that had caused the HP EFS WAN Accelerator to reboot when an HP EFS WAN Accelerator service had been restarted. 7434 Fixed a problem with MAPI2003 handling that had caused a crash in some circumstances.
6359 Fixed critical race-condition in multiprocessor (5000/5010) systems. 4895 Certain conditions may cause connections to specific servers/ports to be immediately reset. 6963 In certain rare cases, unexpected network asymmetry can cause a crash. 6708 Emails reporting duplex errors are sometimes reported, even when there is no actual duplex mismatch. 6964 Crash in the CIFS protocol accelerator has been fixed. Version 2.1.2d build 14 to Version 2.1.
5108 You can use Windows 2000 SP4 Rolling Update 1 with PFS deployments. 4286 In PFS deployments, local mode shares and contained files maintain and honor "read+write+execute" permissions. These permissions are automatically mapped to "full control" permissions. rapanui/18 6708 Duplex error messages no longer appear when there is no actual duplex mismatch. rapanui/17 4328 the Management Console now displays statistics about discarded or denied connections.
6755 Excessive error messages with the "show connections" command have been fixed. rapanui/16 4328 When creating discard or deny in-path rules, you are alerted if you have mistakenly configured discard or deny rules which would cause all connections to fail. Also the "show connections" command now has explicit options to show discarded and denied connection counts. 6599 The "show stats datastore" command correctly displays the percentage of the data store used.
6581 Fixed race conditions in intercept module that could lead to crashes under rare error conditions. 6597 In PFS deployments the verify action ignores the erroneous file attribute differences. 6397 On files in PFS deployments, archive bit differences when synchronizing file data are now ignored. 6598 Fixed "show stats throughput" command that erroneously showed zero throughput. 6603 In PFS deployments, ACL error messages in logs now include the file name and error number.
5880 Problem with 4-port card has been fixed. The HP EFS WAN Accelerator now looks up all the listening sockets instead of one to determine if there is an open connection for the packet. 5879 MAPI2003 forward_request bug has been fixed. 5608 Previously, in rare situations, with out-of-path redundant deployments when the master HP EFS WAN Accelerator is restarted, the backup HP EFS WAN Accelerator takes over and no longer drops the connection. Version 2.1.1 build 10 to Version 2.1.
5195 The default "Synchronization Port" value for "Automated Online Datastore Settings" in the Management Console now displays correctly (port 7744). 1909 If the Management Console hangs while executing external process, others no longer fail. PFS 5807 If a PFS share synchronization is enabled, and the WAN is down, when the synchronization is disabled it now succeeds every time. 5787 Rarely, the Management Console displays a deleted share while the RCU has deleted it internally.
MS-SQL 5791 The HP EFS WAN Accelerator no longer drops connection after saving a loaded Microsoft project without an edit. 5725 Added upgrade rules for HP EFS WAN Accelerator service launch parameters. SAMBA 5663 Added parent wild card node for Samba state nodes. HP EFS WAN Accelerator service 5785 Now clean up peer state (for example, connection pooling, proxy entry, and so forth) in certain OOB drop cases. Miscellaneous 5727 Upgrading to 2.0 from 1.2 no longer causes network interface card problems.
62 The CLI no longer displays an erroneous warning for the "cli default show config_hidden" command. 3960 The HP EFS WAN Accelerator checks for valid interface name in "ip in-path-gateway" setting. 3851 If an invalid job identification number is given in the "no job " command, an error message is now generated. 3340 The HP EFS WAN Accelerator now sends an error message if you attempt to specify a port that is already "bound" by the HP EFS WAN Accelerator.
show protocol cifs internal: displays CIFS internal settings. [no] protocol cifs enable: enables or disables CIFS optimizations. [no] protocol mapi enable: enables or disables MAPI optimizations.