HP StorageWorks Enterprise File Services WAN Accelerator 3.0.4 release notes (AG421-96006, March 2007)

8
enable
configure terminal
hp agents stop
Then, modify the network settings on iLO. After you have finished modifying the network settings, start the
HP agents using the CLI:
hp agents start
An alternative is to modify the iLO settings using the iLO RBSU, available during system boot. See the HP
Integrated Lights-Out home page at http://www.hp.com/servers/lights-out
for information about iLO, and
the HP ROM-Based Setup Utility User Guide on the documentation CD for information about RBSU.
Shutting down the system
When shutting down the system using the web-based interface or the command-line interface, the system
will not automatically power down. A few minutes after the shutdown command is issued, the system goes
into a mode that is safe to power down by using the power button.
Reverting from version 3.x to 2.x
When reverting from EFS WAN Accelerator version 3.x to version 2.x, you need to either clean the data
store on reboot, or run the following commands once you have logged into the CLI (before rebooting to
version 2.x):
enable
configure terminal
no service enable
datastore convert dsv1-format
Known problems
9808 PFS or CIFS prepopulation share names or comments should not use any characters other than
letters, numbers, underscore, space, or backslash (directory separator).
10453 If the origin folder in PFS is deleted or made inaccessible, PFS share deletion silently fails without
notifications or error messages.
11140 When viewing the Management Console web interface, Microsoft Internet Explorer may crash
when using a custom time interval for some statistics graphs. Also, on the throughput graph, Microsoft
Internet Explorer may display the same value for both LAN and WAN. The workaround is to try Firefox or
a different version of Internet Explorer.
11519 Spurious asymmetric route (probe filtering) disables PFS.
Resolved issues
Version 3.0.3 n54 to version 3.0.4 n60
7083 Removed benign CIFS log notice: "Still has pending request count_".
7205 Fixed problem where renamed directories in CIFS may be lost.
8574 Removed WA<->WA connections sometimes seen in "show connections".
8983 Fixed web interface to show correct Netflow default export port (aux, not primary).