HP StorageWorks P9000 Performance Advisor Software v5.2 Install Guide (T1789-96317, May 2011)

10 Removing P9000 Performance Advisor
To remove P9000 Performance Advisor, you must first remove the host agent from each host, and
then remove P9000 Performance Advisor from the management station.
IMPORTANT:
Ensure that the following are completed before you proceed:
• No other user is accessing the folders in the <Installation_Directory>\HPSS
(%HPSS_HOME%) folder on the management station and the <Installation_Directory>\
Program Files\Hewlett-Packard\XPPA\hostagent folder on the respective hosts.
If it is a custom install location, the HPSS folder is available in the <Installation_Drive>:\
<Installation_Directory>\HPSS folder and the hostagent folder is available in the
<Installation_Drive>:\<Installation_Directory>\hostagent\config folder.
• None of the P9000 Performance Advisor related files, such as the log files, script files, properties
files are being accessed by other users.
You must log on to the host and the management station as a default administrator
(administrator:administrator) to remove the host agents and P9000 Performance Advisor respectively.
Removing the P9000 Performance Advisor host agent
NOTE:
• If the Storage Area Manger 3.3 host agent is also installed on the same host as the P9000 Per-
formance Advisor host agent, remove the P9000 Performance Advisor host agent before removing
the Storage Area Manager host agent. Removing the Storage Area Manager host agent first might
lead to the removal of some P9000 Performance Advisor components.
• Use the host agent installer of the existing installed version to remove the host agent.
• After the existing host agent version is removed, the corresponding host agent record is still visible
on the P9000 Performance Advisor's Host Information screen. Click Remove Host to manually
remove the host agent record from the management station. For more information on removing
host agent records, see the HP StorageWorks P9000 Performance Advisor Software User Guide .
For document download location, see “Related documentation” on page 152.
Removing a Windows host agent
To remove the host agents from the Windows hosts, complete the following steps:
1. At the host, select Start > Run, type appwiz.cpl, and press the Enter key.
HP StorageWorks P9000 Performance Advisor Software Installation Guide 121