HP StorageWorks P9000 Performance Advisor Software v5.2 Install Guide (T1789-96317, May 2011)
2. Right-click Local Area Connection, select Properties.
3. Under the General tab, double-click Internet Protocol (TCP/IP).
The Internet Protocol (TCP/IP) properties Window is displayed.
4. Click the Advanced tab.
The Advanced TCP/IP Settings window is displayed.
5. Under the DNS tab, select Append DNS suffixes.
6. Add host name suffix.
7. Click OK to save the settings.
Clearing web browser's cache
If the web browser's cache is not cleared, it might try to access the files from the cache folder.
Resolution
Clear the web browser's cache by performing the following steps:
1. In Internet Explorer, go to Tools > Internet Options.
2. Under the General tab, select Delete Cookies > Delete Files > Clear History.
3. Under the Privacy tab, set the vertical slider to Block all Cookies.
4. Click Apply.
5. Close IE and launch P9000 Performance Advisor.
Modifying the web browser's security and ActiveX settings
Though Adobe Flash Player and Flash Player Plugin, v10.0.0 or later are installed on your system,
the web browser on your system might display the message Alternate HTML content should
be placed here. This content requires the Adobe Flash Player. Get Flash,
when you launch P9000 Performance Advisor using one of the following:
• P9000 Performance Advisor shortcut link
• Fully qualified DNS or IP address of the management station
This is because your web browser is configured for a high security level.
Resolution
Set the default security level to Medium for your web browser by completing the following steps:
1. In your web browser window, click Tools > Internet Options.
2. Click the Security tab.
3. Select the Internet icon.
4. Click Default Level to use the recommended security level (Medium).
5. Set the vertical slider to Medium under Security level for this zone.
6. Click Apply and then OK to save the modified security level.
Alternatively, customize the security level to Medium for only the ActiveX controls and plug-ins by
completing the following steps:
1. Execute the first three steps mentioned in the above procedure.
2. Click Custom Level.
3. Navigate to the ActiveX controls and plug-ins section in the Settings window.
HP StorageWorks P9000 Performance Advisor Software Installation Guide 143