Manualshelf

HP StorageWorks P9000 Performance Advisor Software v5.2 Install Guide (T1789-96317, May 2011)

ManualsBrandsHP ManualsSoftwareHP StorageWorks Performance Advisor XP Media Kit
41424344454647484950
Retaining or selecting a different database location
By default, the P9000 Performance Advisor database (padb) folder is placed on the same
<Installation_Drive>, where you install P9000 Performance Advisor. The Install Database to displays
the default location for your P9000 Performance Advisor database, which is
<Installation_Drive>\HPSS\padb. In this context, the <Installation_Drive> refers to the C drive
where Windows operating system is installed.
Figure 7 Database Location Specification installation window
.
• If disk space is not available on the default <Installation_Drive>, the installer suggests
another disk volume in your management station, where the database can be placed.
• You can also select another folder location on the default <Installation_Drive> or a different
disk volume and the folder location for your P9000 Performance Advisor database. To manually
select a different location:
1. Click Change, do one of the following:
• Browse to the folder in the Change Location window
• Enter the path to the folder in the Folder Name text box
2. Click OK.
The Install Database to displays the updated database location.
TIP:
For optimal performance, HP recommends that you place the P9000 Performance Advisor database
on a disk volume other than where P9000 Performance Advisor is installed.
Click Next to proceed. The IPv6 Configuration installation window appears. For more information on
the next set of steps, see “Enabling IPv6 and configuring HTTP port for the management
station” on page 47.
Enabling IPv6 and configuring HTTP port for the management
station
By default, your management station is enabled to use IPv4 as its communication protocol. In addition
to IPv4, you can enable IPv6 on your management station. It allows P9000 Performance Advisor to
use IPv6 for all its communications and also operate with other hosts that are configured in an IPv6
environment. If you have enabled the P9000 Performance Advisor for IPv6, ensure that the associated
HP StorageWorks P9000 Performance Advisor Software Installation Guide 47